MG-42 Dummy Guns
Complete MG-42 Dummy Gun as shown $1,450
#5500 built on Dummy Receiver Mounted on CARC Brown Tripod with Optics
MG-42 Dummy Guns (SOLD OUT)
This dummy gun is indistinguishable from the original. It has the same external appearance, texture, and weight as the original. It comes complete with all parts except for the bolt, mainsping, and sear. You will have a fully assembled MG-42 that will show great out-of-the-box, and fit on any MG-42 mount you may already have. You can also insert a belt, change barrels, attach belt drums, set the bipod in front or rear position, operate the cocking handle, and disassemble just like the original. The short-recoil tube is also fitted in this receiver to allow the quick-change-barrel feature function just as the original.
AttributesMaterial 1010 Steel - Cold Roll
Sheet Metal Thickness - 2.5mm (approx 0.1 in.) same as original MG-42
Made on All-Steel Tooling for Repeatable Dimensions
Maximum Stamping Pressure - 450 tons
Heat Treated Ratchet Plate
Semi Auto Parts
Full-Length MG42 SEMI AUTO Receivers Back in Stock
$1700 (FFL required)
SPECIAL: If you buy a parts kits, you can get an MG-42 Semi-Auto Receiver for $250 off: ($1450)
MG 42 Parts Sets
- Sheet metal receiver with original front bushing installed
- The rear has been machined for buffer but the buffer tabs are not installed
- The rail mount holes and “D” cuts are already done
- The trunion cutouts are done
- The trigger pack cutout in to our Semi Auto standard using the back of the ejection port.
- The holes for the barrel door assembly, barrel stop, rear sight, and front tripod mount are properly located and rivet-ready.
- The ratchet plate with original bump pattern is included but not installed
- The buffer tabs are included but not installed
- The buffer latch stud is included but not installed
- Includes complete rivet kit
- The MG42 SA blocker bar is included but not installed
MG42 SEMI AUTO KIT ($2475)
The kit includes all of the parts we use to assemble a functional MG-42 Semi Auto:
1) Full-Length MG-42 Semi-Auto Receiver (same as above)
Trigger Housing Brkt / Rear Tripod Mount
Buffer Tabs w/ rivets
Buffer Latch Assembly
Rails w/ rivets
Ratchet Plate
Trunion with rivet and screw setups
Quick-Change Barrel Door with rivets
Barrel Stop with rivets
Rear Sight Assembly
Front Sight Assembly
Front Tripod Mount
Semi Auto Blocking Bar
2) Complete Assembled Bolt
3) Complete Assembled Trigger Pack (original grips must be fit)
4) Buffer & Butt Stock (wood)
5) Charging Handle
6) Semi-Auto Mainspring
7) Top Cover and Feed Tray (8mm WW2)
8) Barrel (Yugo 8mm)
9) Bipod (Yugo adjustable)
10) Recuperator Assembly (requires modification) w/ hardware
11) Flash-Hider/Booster Assembly
12) Copy of ATF letter approving this configuration
(Bipod included but not shown)
MG42 SEMI AUTO Rear Receivers $825 (FFL required)
- The rear has been machined for buffer but the buffer tabs are not installed
- The rail mount holes and “D” cuts are already done
- The trigger pack cutout in to our Semi Auto standard using the back of the ejection port.
- The ratchet plate with original bump pattern is included but not installed
- The buffer tabs are included but not installed
- The buffer latch stud is included but not installed
- Includes complete rivet kit for rear parts
- The MG42 SA blocker bar is included but not installed
Extra-Heavy AR Hammer Spring (for Yugoslav and other hard-primered ammo): $8
Medium-Heavy AR Hammer Spring (for Romanian and other standard military ammo): $8
Semi Auto Bolt Parts
Other Useful Parts
1) New production Ratchet Plate made to original specifications: $50
2) World War 2 mfg rails stripped from original guns: $35 per set
3) MG-34/42 Tripod mount pin: $20
4) Rail Rivets: $4 per set of 10
5) Trunion Rivets: $3
6) Trunion Screw & Nut: $6
7) Barrel Door Rivets: $20 for 2
8) Front Sight Rivets: $15 for 2
9) Cocking Handle WW2: $55, Yugo $45
10) Trigger Housing with grips: $155
11) Sear Trip/Release with Spring: $10
12) Sear with Spring: $10
13) Firing Pin: $10
14) Ejection Port Cover and Pin Assy: $10
15) Short Recoil Assembly With Screws and Nuts: $85
16) Feed Cover complete with Feed Tray (WW2 Markings) $160.00, Yugo $120
17) Bipod Yugo: $85, German WW2 $115
18) Rear Buffer Tabs (new production): $30
19) Buffer Latch Stud (new production): $10
20) MG-42/53/3 Short Recoil Screw Set: Front Post, Rear Post and 2 nut (new production): $40
21) Mainspring WW2: $15
22) MG-34/42 Trigger Housing Pins (1 male, 1 female): $8 per set
23) Trigger Housing Pin (hitch style): $8
24) Buffer Assembly 8mm WW2: $50
25) Bakelite Grips with screws WW2: $75 red, $100 for black or brown
26) Front Sight Assembly WW2 (Front Sight w/ spring & plunger, Flash-Hider Latch, and Base): $50, early pattern: $75
27) Front Recevier Bushing WW2: $125
28) Rear Sight w/ Pin WW2: $30
29) Rear Sight Base WW2: $30
30) Blemished WW2 Trunions: $45
31) Safety Toggle WW2: $25
MG42 Transit Chest (Reproduction) $295
This useful box is a faithful reproduction of the original transit chest with latches and carry handles. It's designed to hold the gun, bipod, gunner's kit, 2 barrel carriers, basket drum, and some loaded belts. The box shown has reproduced Nazi 'chicken' proof marks (optional).
50 RD BELTS WITH WW2 MARKINGS
1937 DATED BELT: $75 EA
1938 DATED BELT: $50 EA
1939 DATED BELT: $40 EA
1940 DATED BELT: $25 EA
1941-42 DATED BELT: $20 EA
LATE WAR BELT: $20 EA
WW2 STARTER TAB: $30
WW2 Steel Double-Hinged Can w/ Sealing Gasket: $75 ea
