LOT 

Actual Items Pictured

Conditions as Shown

Only includes items shown in the lot photo #1

Includes:

• lower modified for use with AK hammer setup 
• Considering the missing part and current c..

  Price: $175.00

  ]]>

  LOT 

  Actual Items Pictured

  Conditions as Shown

  Only includes items shown in the lot photo #1

   

  Includes:

  • lower modified for use with AK hammer setup 
  • Considering the missing part and current c..

    Price: $175.00

    ]]> LOT 

    Actual Items Pictured

    Conditions as Shown

    Only includes items shown in the lot photo #1

     

    Includes:

    • lower modified for use with AK hammer setup 
    • Considering the missing part and current c..]]> https://www.brpguns.com/kp31-shroud-shim-01-thick/ Fri, 30 Dec 2022 17:13:16 +0000 https://www.brpguns.com/kp31-shroud-shim-01-thick/

      Copied from original parts and made from stainless steel.

       

      Thickness .01"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for accu..

      Price: $4.85

      ]]>

      Copied from original parts and made from stainless steel.

       

      Thickness .01"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for accu..

      Price: $4.85

      ]]> Copied from original parts and made from stainless steel.

       

      Thickness .01"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for accu..]]> https://www.brpguns.com/copy-of-stemple-stg-9mm-barrel-16-threaded-1-2-28/ Thu, 30 Jul 2020 13:42:43 +0000 https://www.brpguns.com/copy-of-stemple-stg-9mm-barrel-16-threaded-1-2-28/

      16" barrel for Semi Auto KP31.  

      Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".

       

      HEADSPACE on Closed Bolt Semi Auto Guns vs Open Bolt / Fixed Firing Pin Blow Back..

      Price: $135.00

      ]]>

      16" barrel for Semi Auto KP31.  

      Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".

       

      HEADSPACE on Closed Bolt Semi Auto Guns vs Open Bolt / Fixed Firing Pin Blow Back..

      Price: $135.00

      ]]> 16" barrel for Semi Auto KP31.  

      Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".

       

      HEADSPACE on Closed Bolt Semi Auto Guns vs Open Bolt / Fixed Firing Pin Blow Back..]]> https://www.brpguns.com/copy-of-kp31-shroud-shim-005-thick/ Thu, 23 Feb 2017 15:02:55 +0000 https://www.brpguns.com/copy-of-kp31-shroud-shim-005-thick/

      Copied from original parts and made from stainless steel.

       

      Thickness .002"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..

      Price: $4.85

      ]]>

      Copied from original parts and made from stainless steel.

       

      Thickness .002"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..

      Price: $4.85

      ]]> Copied from original parts and made from stainless steel.

       

      Thickness .002"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..]]> https://www.brpguns.com/kp31-barrel-shim-001-thick/ Sat, 26 Mar 2016 19:52:17 +0000 https://www.brpguns.com/kp31-barrel-shim-001-thick/

      Copied from original parts and made from stainless steel.

       

      Thickness .001" 

       

      These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.

       

      This part tightens the barre..

      Price: $2.75

      ]]>

      Copied from original parts and made from stainless steel.

       

      Thickness .001" 

       

      These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.

       

      This part tightens the barre..

      Price: $2.75

      ]]> Copied from original parts and made from stainless steel.

       

      Thickness .001" 

       

      These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.

       

      This part tightens the barre..]]> https://www.brpguns.com/kp31-shroud-shim-005-thick/ Thu, 07 Jan 2016 14:28:40 +0000 https://www.brpguns.com/kp31-shroud-shim-005-thick/

      Copied from original parts and made from stainless steel.

       

      Thickness .005"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..

      Price: $4.85

      ]]>

      Copied from original parts and made from stainless steel.

       

      Thickness .005"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..

      Price: $4.85

      ]]> Copied from original parts and made from stainless steel.

       

      Thickness .005"

       

      This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.

       

      This is a very useful part for acc..]]> https://www.brpguns.com/stemple-stg-9mm-barrel-12-75/ Fri, 26 Jun 2015 09:57:14 +0000 https://www.brpguns.com/stemple-stg-9mm-barrel-12-75/

      12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.

       

      Extractor Location

      The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for full..

      Price: $160.00

      ]]>

      12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.

       

      Extractor Location

      The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for full..

      Price: $160.00

      ]]> 12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.

       

      Extractor Location

      The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for full..]]> https://www.brpguns.com/brp-photo-cds-2800-photos/ Tue, 09 Nov 2010 12:33:14 +0000 https://www.brpguns.com/brp-photo-cds-2800-photos/

      This 2 CD pack contains 2800 photos of MG34 parts and kits, MG42 parts and kits, a few MP40 pictures, and two FG42s.  Most of the pictures are from our cataloging of MG34 and 42 parts purchased domestically and abroad. They are sorted by catalog date and include the original descriptions a..

      Price: $12.95

      ]]>

      This 2 CD pack contains 2800 photos of MG34 parts and kits, MG42 parts and kits, a few MP40 pictures, and two FG42s.  Most of the pictures are from our cataloging of MG34 and 42 parts purchased domestically and abroad. They are sorted by catalog date and include the original descriptions a..

      Price: $12.95

      ]]> This 2 CD pack contains 2800 photos of MG34 parts and kits, MG42 parts and kits, a few MP40 pictures, and two FG42s.  Most of the pictures are from our cataloging of MG34 and 42 parts purchased domestically and abroad. They are sorted by catalog date and include the original descriptions a..]]> https://www.brpguns.com/products/Suomi-KP31-Barrel-Shim.html Thu, 28 Oct 2010 10:56:26 +0000 https://www.brpguns.com/products/Suomi-KP31-Barrel-Shim.html

      Copied from original parts and made from stainless steel.

       

      Thickness .003"

       

      This part tightens the barrel to jacket fit by 'shimming' the rear collar of the barrel.

       

      This is a very useful part for accurizing you gun or just fixin..

      Price: $2.75

      ]]>

      Copied from original parts and made from stainless steel.

       

      Thickness .003"

       

      This part tightens the barrel to jacket fit by 'shimming' the rear collar of the barrel.

       

      This is a very useful part for accurizing you gun or just fixin..

      Price: $2.75

      ]]> Copied from original parts and made from stainless steel.

       

      Thickness .003"

       

      This part tightens the barrel to jacket fit by 'shimming' the rear collar of the barrel.

       

      This is a very useful part for accurizing you gun or just fixin..]]> https://www.brpguns.com/products/Suomi-KP31-Transit-Chest.html Wed, 08 Sep 2010 11:27:30 +0000 https://www.brpguns.com/products/Suomi-KP31-Transit-Chest.html

      Transit Chest Only (ships free in Lower 48)

      Gun and Parts Shown For Reference  (NOT INCLUDED)

       

      Price: $445.00

      ]]>

      Transit Chest Only (ships free in Lower 48)

      Gun and Parts Shown For Reference  (NOT INCLUDED)

       

      Price: $445.00

      ]]> Transit Chest Only (ships free in Lower 48)

      Gun and Parts Shown For Reference  (NOT INCLUDED)

       

      ]]>