Product Description
If you don't have the special tools, squeeze-riveting the original pattern double countersunk front sight rivets can be challenging. We came up with this screw and nut system for attaching the MG42 front sight and flash hider latch to the receiver. The barrel diameter on the nut and shoulder on the screw is 4mm and is compatible will all MG42, M53, M74, 42/59, and MG3 receiver mount holes. Use locking compound on the threads to secure from loosening.
Includes:
- 1 x screw (M3x0.5)
- This is the same thread a used with the securing screw for the KNS AR trigger/hammer pins. The KNS pointed guide (not included) used for installing their hammer/trigger pins will work with these as well.
- 1 x barrel nut
- Both Made from Steel with Black Oxide Finish
Note: 2 sets are required for the front and rear mount holes.
