MG42 308 Barrel (7.62 NATO) CHROME LINED with Yugo Barrel Carrier

Newly manufactured CHROME LINED barrel with original German barrel collar installed and properly headspaced. Barrel Material: CrMoV - GBQ Commonly called "CMV" This durable material was imported from a specialty steel manufacturer in Germany and is...

MG42 308 Barrel (7.62 NATO) CHROME LINED

Newly manufactured CHROME LINED barrel with original German barrel collar installed and properly headspaced. Barrel Material: CrMoV - GBQ Commonly called "CMV" This durable material was imported from a specialty steel manufacturer in Germany and is...

Repair Piece for BRP Second Pattern Semi Auto Bolt

This piece is designed to repair a BRP 2nd Pattern bolt that has broken ears for the spring seat.   To install the bolt needs to be machined flush in the rear and 2 x .377" slots need to be machined at the top and bottom for the tabs on this part...

MG42 Semi-Auto Bolt Roller, Support Shim, and Screw

Includes Roller Bearing, Support Shim, and Screw  

MG-42/53/3 REAR Short Recoil/Recuperator Screw Set: (Rear Only)

New production: Includes Rear Screw and Nut

MG-42/53/3 FRONT Short Recoil/Recuperator Screw Set: (Front Only)

New production: Includes front post and nut

MG42 Semi-Auto Bolt Rear Post Only

Includes Rear Post only. The Rear Post is pressed into the bearing hole in the original bolt carrier (002 interference fit). The original bolt carrier will need to be reamed to a precise diameter. Diameter of post .285 Size of reamer .283 We typically...

MG34 - MG42 - M53 Broken Shell Tool

Original Item: Excellent condition  

MG42 Semi-Auto Ejector Bar

MG42 Semi-Auto Ejector Bar (Second pattern)   Include retaining pin

MG42 Semi-Auto Firing Pin FRONT SPRING

MG42 Semi-Auto Firing Pin FRONT SPRING This spring is the same for both patterns of firing pin.

MG-42/53 Brass Catcher

Original Item: Yugo mfg

MG42/53 Extractor Removal Tool

Original item: Yugo mfg

MG42 Semi-Auto Firing Pin (Second Pattern)

MG42 Semi-Auto Firing Pin with Spring (Second Pattern)   Spacers included for timing of pin tip to head

BRP Second Pattern Semi Auto Bolt Assembly (WITHOUT HEAD)

BRP Semi Auto Bolt Assembly less orignal bolt head and drilled striker / firing pin wedge.   Drill size .1660"  (size 19)   Includes all parts except for the original bolt head and drilled firing pin wedge.   MG42 SA Firing Pin...

BRP Second Pattern Semi Auto Bolt Assembly

BRP Semi Auto Bolt Assembly - Semi Auto Mainspring and Extra Timing Washers Included - Bolt Heads may have minor blemishes (see sample photo) - The heads typically have a ring around the firing pin hole but are in useable condition...

MG42 Bolt Charging Piece

This part gets welded to the bottom of an original MG42 bolt for the semi-auto pattern charging catch.

Semi Auto Bolt Kit (first pattern)

This kits includes the parts we use to convert a full-auto MG42 / M53 bolt to a semi-auto configuration: Firing Pin w/ spring Firing Pin Support Bushing Charging Piece Rear Post Roller Bearing Roller Bearing Screw Roller Bearing Support...

MG42 Semi-Auto Bolt Extension

This part is welded to the rear of an original MG42/53 bolt carrier.   NOT METAL FINISHED  MG42 SA Bolt and Buffer Setup

MG42 Semi-Auto Bolt Rear Post Assembly

Includes Roller Bearing, Support Shim, Rear Post, and Screw     The Rear Post is pressed into the bearing hole in the original bolt carrier (002 interference fit). The original bolt carrier will need to be reamed to a precise diameter...

MG42 Semi-Auto Firing Pin Support Bushing

This bushing gets pressed into the ejector pusher to support the semi auto firing pin

MG42 Semi-Auto Firing Pin (First Pattern)

MG42 Semi-Auto Firing Pin with Spring FIRING PIN SUPPORT BUSHING REQUIRED - SOLD SEPERATELY 

MG42 Semi-Auto Mainspring

For BRP-pattern MG42 SA

MG42 Semi-Auto Bolt Blocker

This part is welded to the underside of the MG42 Semi-Auto receiver to prevent the introduction of a full auto bolt.

MG42 Semi-Auto Bolt Wedge Drilled for Semi-Auto Firing Pin (Wedge ONLY)

Center of Wedge Drilled for use with a Semi Auto MG-42 firing pin ONLY INCLUDES THE WEDGE

MG42 - MG3 - M53 Rails

German production MG3 rails: no holes New condition

MG42 Ratchet Plate

MG42 Ratchet Plate (new production)

MG-42/53/3 Short Recoil/Recuperator Screw Set: Front Post, Rear Post and 2 nuts (new production)

New production Includes Front Post with Nut and Rear Screw with Nut

MG42 Bolt Drive Stud and Ejector Pusher

Removed from bolt

MG42/53 Ejector Bar - spoon - Yugo (original)

Original Item: Yugo

MG42-M53 Bolt Carrier - YUGO

Original Item  Yugo markings