Suomi KP31 & Swed 37 SMG

Suomi M/31 - The Finnish Machine Pistol

Suomi M/31 - The latest book from Michael Heidler, about the Suomi submachinegun. 8.5"w X 12"h, hardcover. Many pictures, written in both German and English, 95 pages.

Stemple Suomi Blank Firing Barrel

Includes: 1 x Blanks Firing Barrel Ideal for use with Canadian Blanks   12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.   1 x 1/16" BFA Aperture  for use with the...

Lot: KP44 semi project parts

LOT  Actual Items Pictured Conditions as Shown Only includes items shown in the lot photo #1   Includes: lower modified for use with AK hammer setup  Considering the missing part and...

KP31 Shroud Shim - .01" thick

Copied from original parts and made from stainless steel.   Thickness .01"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion...

KP31 Suomi SEMI AUTO HEADSPACE pattern 9mm Barrel 16" Threaded 1/2-28

16" barrel for Semi Auto KP31.   Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".   HEADSPACE on Closed Bolt Semi Auto Guns vs Open...

KP31 Shroud Shim - .002" thick

Copied from original parts and made from stainless steel.   Thickness .002"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion...

KP31 Barrel Shim - .001 thick

Copied from original parts and made from stainless steel.   Thickness .001"    These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit...

KP31 Shroud Shim - .005" thick

Copied from original parts and made from stainless steel.   Thickness .005"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion...

Stemple STG 9mm Barrel 12.75"

12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.   Extractor Location The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged...

BRP Photo CDs (2800 photos)

This 2 CD pack contains 2800 photos of MG34 parts and kits, MG42 parts and kits, a few MP40 pictures, and two FG42s.  Most of the pictures are from our cataloging of MG34 and 42 parts purchased...

KP31 Barrel Shim - .003 thick

Copied from original parts and made from stainless steel.   Thickness .003"   This part tightens the barrel to jacket fit by 'shimming' the rear collar of the barrel.   This is a very useful...

Suomi KP31 Transit Chest

Transit Chest Only (ships free in Lower 48) Gun and Parts Shown For Reference  (NOT INCLUDED)