USGI Thompson

Original Thompson Cleaning Rod - Steel

Original item - Steel Overall length 16" with 2" hoop at end Most of the rods have very minor rust spot from long term storage (see pics).  These will cleanup with a bit of steel wool or Sctoch Brite.  

US Nickel Oiler (4.25" long) for US Rifles P17, P14, 1903- MISSING LEATHER BUMPER

1903, P14, P17, and Garand Nickel-Plated Short Oiler.   

Catch Assembly, Thompson - Savage - Pitted - Parkerized

Original Item:  Pitting generally as pictured Parkerized Refinished "S" Savage Marking Lever: C64380 SPRING NOT INCLUDED

Plate Assembly, Thompson - Savage

Original Item:  Very Good to Excellent Condition "S" Savage Marking Lever: B147690  

Original 1969 Printing USGI M3 Grease Gun Training Manual

Original Item: 1969 Printing USGI M3 Grease Gun Training Manual

Original British Thompson Firing Pin Protrusion Gauge - script pattern

Original WW2 British Issue Armorer's Gauge Gauge No. 3972 Unlike the other pattern. The markings were done by hand by the Music company in the UK   This is designed to measure the protrusion of the firing pin on the Thompson SMG. This is...

Thompson Mainspring 1928 & M1A1

Original item - Steel Overall length 11.5" Most look like new old stock U.S. Part # A153024 (1928A1) / A153116 (M1A1), interchangeable.  

Rocker, Thompson - AOC

Original Item:  Rocker: B147682

Rocker, Thompson - Savage

Original Item:  Rocker: B147682

Trip, Thompson - Savage

Original Item:  Trip: B147686

LEVER with SPRING, Thompson - AOC

Original Items:  Lever: B1476745 Spring: A153026

LEVER with SPRING, Thompson - Savage

Original Items:  Lever: B1476745 Spring: A153026

Mag Follower for Thompson 20 & 30 rd mags (last shot drop)

New made item. This follower is machined form aluminum and hard anodized. There's a ramp machined into the top of the follower and no tab on the follower rear to engage the last-shot-hold-open feature.  After firing the last shot the bolt will...

Magazine Enhancer for 1928 Pattern Subguns

Spacer for 1928 pattern magazine well for use with 20 and 30 round Thompson magazines. The drums used in the 1928 pattern Thompson are wider than the standard 20 and 30 round magazines.  The resulting gap between the front of the magazine and feed...

Original USGI Thompson Mag Follower for 20 & 30 rd mags

Original Item:  Includes 1 Follower

1928 / M1A1 "L" sight

Reproductiion:  blued

USGI SMG Oiler 1950s M2/M3 (1 included) - Good condition

Original Item:  1 x USGI Oiler.  Good condition with minor blemishes  

Thompson Firing Pin Protrusion Gauge

Original WW2 British Issue Armorer's Gauge Gauge No. 3972   This is designed to measure the protrusion of the firing pin on the Thompson SMG. This is critical since the Thompson bolt headspaces from a surface inside the receiver rather than...

US Nickel Oiler (4.25" long) for US Rifles P17, P14, 1903 (1 oiler included)

1903, P14, P17, and Garand Nickel-Plated Short Oiler.   

Picatinny Rail Adapter For Thompson SMG & BRP STG M1A1/1928

Takes place of original USGI rear sight on our housings (Threaded 8-32). No modifications required for the STG1928.   If you have a semi auto Thompson with 8-32 threaded mount holes this will fit without modifications as...

BRACKET, butt (Assembly, NO SCREWS) - Parkerized

Original Items: Milled, parkerized grey  DOES NOT INCLUDE SCREWS

BRACKET, butt (Assembly, NO SCREWS) - blued

Original Items: milled, blued  DOES NOT INCLUDE WOOD SCREWS