Product Description

2020 Update: We've recently switched to NiB One™ plating (silver/gray color) on the lower assembly, magazine housing, and barrel jacket. This high performance finish adds greater durability and ease of cleaning compared to the black anodized finish. 

U9 - Standard Bolt System 

The STG Universal 9 (U9) features a simple, smooth-running blow-back system similar to the Suomi M31 which yields a cyclic rate of 750 rounds per minute.  These are the most smooth, controllable, and versatile subguns on the transferable market.  It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts.  This setup utilizes rigid AK/ACE side-folding stocks or AR pattern stocks, AR pattern grips, and a variety of shroud and barrel options for both heavy and light setups. 

Parts and Accessories Included With Each Gun: foregrip, 2 drums, 1 magazine, multi-tool, spare buffer, barrel locknut/muzzle cap tool, choice of barrel and shroud setup  (sights not included)

Transferable

In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff.  From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups.  Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy.  These are the most finely built and smooth running sub-machine guns on the transferable market.  We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service.  There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last.

If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons:

They are ‘new’

Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers.

Simple / Durable Design

Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam.

Customizable

By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics.   The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. 

Easy-to-Replace Parts

There’s nothing on these guns that can’t be easily replaced.  We designed this system to protect the registered receiver from any wear during use.  The only parts that can wear can be easily replaced without the need to ship the gun back and forth.

Available Service

If you need service, we are here to support our products.

Shoot Cheap Ammo

We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo.

Capacity and Control

These guns use 70 round drums and are smooth cycling, heavy, accurate, and comfortable to hold.  It's basically an assault rifle with a sub-caliber setup... a very controllable and accurate gun in full auto.  It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts.  The 'laser beam' performance of this gun makes it one of the most enjoyable full auto guns you'll ever shoot.

Can't Get Too Hot

These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun.  There's no gas system to clog, and the open-bolt system negates any cook-off risk.

Product Information:

NiB One™  plating (silver/gray color) on the lower assembly, magazine housing, and barrel jacket. This high performance finish adds greater durability and ease of cleaning compared to the anodized finish.

Select-Fire with Quick-Change Barrel

Caliber:   9mm

Weight: 8 lbs with MN shroud/barrel, 9.7 lbs with Suomi M31 shroud/barrel

Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums

Standard Rate Setup with Folding Stock (750rpm)

(sights not included)

Add-on Items:

STG U Series Case: Custom routed HD foam instert designed to fit the U9, U9 Slow Fire & U45

Case: $475

Silencer:  $425

Add both for $600

Stock Options

The U9 Buffer uses the ACE-pattern screw mount (2 x 10-32 threaded holes) for attaching the stock assembly.  The Skeleton Stock can be used with or without the folding stock mechanism.  Also, there are numerous other adapter and stock sets that are also compatible with the U9 Buffer including an AR stock adapter    These include the following:

Skeleton to AR Folding Stock Adapter for U9:  http://star15.com/ar-stocks-folding-mechanism-fsm-ar.html 

Skeleton AR Buffer Stock: http://star15.com/skeleton-stock-arfx.html

ACE Original Skeleton Stock: http://star15.com/ak-skeleton-stock-akfx-ss.html

Folding Stock Mechanism: http://star15.com/push-button-folding-mechanism-fsm-pb.html

Single Point Adapter: http://star15.com/single-point-adapter-plate.html

Push Button Adapter: http://star15.com/umpb-cup-screw-nut-no-swivel.html 

Triangle Manticore Stock:  http://www.robertrtg.com/store/pc/MANTICORE-TRIANGLE-STOCK-WITH-HINGE-ASSEMBLY-4p3603.htm