Vickers Tripod Parts

Vicker's Tripod Traversing Check Clamp

Original Item: 6, 7, 8 and 9

Vickers Tripod Crosshead Joint Pin and Elevating Gear Pin Set (low grade)

Original Item(s): Pins for Vicker's tripod    These are mostly black from the de-rusting process. Generally Low Grade Condition Many of the pins have Drill Purpose (DP) stamps  

Handle, Jamming, front legs

Handle, Jamming, front legs

Tripod Chain for Crosshead Pin

This chain is for the Crosshead Pin Joint.   Condition generally as shown without any finish.   No stud or washer    

Vicker Tripod Elevating Gear Joint Pin (pictured bottom)

Vickers Tripod Crosshead Joint Pin (pictured top)

Original Item(s): Pin for Vicker's tripod  HAS MINOR PITTING

Vickers Tripod Elevating Nut Washer

Common spare part item in Vickers spares kits

Tripod Chain for Elevating Gear Joint Pin

This chain is used for elevating gear joint pin.   Condition generally as shown.

16: RIVET, Clutch Plate

Original Item:  

21: Loop, Pin, Joint, Crosshead, Mk. 2b

Original Item:  C1/BD 2269

22: STUD, Joint, Front Leg

Original Item:  

23: Spring, Disc

Original Item:  

26: Washer, Stud, Joint, Front Legs

Original Item:  C1/BD 2341

25: Loop, Pin, Joint, Elevating Gear, Mk. 2b

Original Item: - C1/BD2270 - Drawing Number MGD 1907

Centering Block - Left - No Markings

Original Item: Centering Block - Left No Markings  MOUNTING SCREWS NOT INCLUDED

Centering Block - Left - MAXIM markings

Original Item: Centering Block - Left "303 MAXIM, MkIV" Markings   MOUNTING SCREWS NOT INCLUDED

Centering Block - Left with Mounting Screws - MAXIM markings

Original Item: Centering Block - Left 2 Mounting Screws "303 MAXIM, MkIV" Markings   

Lot: 6 Left Centering Blocks and one Pointer With Nice Markings - one is dated 1912

Original Items - Condition as shown Centering Block - Left qty 6 Pointer MK2 (spring type) One of them has a 1912 date on it The steel mounting screws pictured right are rusted.    

SCREW - Centering Block - Steel

Original Item: SCREW, Block, Centering - Steel   This is the standard Centering Block Mounting Screw that can be used on both sides.  If the pointer is mounted to the right side, the longer screw is required to mount the pointer and...

SCREW - Centering Block - Brass

Original Item: SCREW, Block, Centering - BRASS   This is the standard Centering Block Mounting Screw that can be used on both sides.  If the pointer is mounted to the right side, the longer screw is required to mount the pointer and...

SCREW - Pointer / Centering Block - LONG Steel

Original Item: SCREW, Block, Centering - Steel LONG   This is the longer screw required for mounting the pointer and right centering block to the right side of the crosshead.