MG-34 Pin set

All of the pins are newly manufactured. Countersunk on both ends, just as the originasl, for peening. Includes: 1 x Buffer Latch Pin 1 x Sear Lever Pin 1 X Recuperator Retaining Pin 1 x Top Cover Hinge Retaining Pin Finish: Black

MG-34 Buffer Latch Retaining Pin

This is a reproduction of the retaining pin for the buffer latch.  The same pin is used for retaining the sear lever.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG-34 Sear Lever Pin

This is a reproduction of the retaining pin for the sear lever.  The same pin is used for retaining the buffer latch.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG34 Charging Handle Cocking Piece - Newly Made

Newly Made Item   This is a machined and hardened steel replacement part for the MG34 charging handle.  The cocking piece is the part that contacts the bolt carrier to charge the gun. Rather than being held by 2 rivets, we have made this...

MG34 GRIP SET, REPRODUCTION

U.S. made MG34 reproduction grip set.  These are molded from original MG34 grips.  Rivets are not included, but these will function fine for replacement of broken grip panels.   

210922-01: MG34 Parts Lot

Original Items Actual items pictured Includes:  2 x bolt catch levers. 1 has a worn edge.  The other has a good edge and early Rheinmetall marking 1 x ejector plate with Mauser marking. Looks to have some storage wear and pitting on the...

Lot 210917-05: Misc MG34 Parts

Orignal ItemsActual Items PicturedCondition As Shown Lot Includes: Top Receiver Cam with Stripped Rivets Ejection Port Cover with Spring and Pin Early Pattern 'Long' Recuperator with Spring and Pin Early Pattern Sear Trip Lever Broken Safety 1 Set...

Lot 210917-04: Misc MG34 Parts

Orignal ItemsActual Items PicturedCondition As Shown Lot Includes: Barrel Jacket Bolt Catch with Spring & PinRecuperator with 2 Springs and PinEarly Pattern Sear Trip Lever with 2 Pins Top Cover Hinge Pin with Spring and Retaining Pin Sear with...

Lot 210917-01: Misc MG34 Parts

Orignal ItemsActual Items PicturedCondition As Shown Lot Includes: Buffer Latch with Pin (no spring)Recuperator with 3 springsSafetySear with spring and pin (sear has crack in spring seatEjector Plate1 Set of Trigger Housing Mount Pins (1 male / 1...

MG34 Grips (Czech - lot 5)

Original Czech or Israeli Aluminum Grips   Condition: as shown.  Looks like someone drilled a hole in the middle for an additional securing bolt  

MG34 Sear Trip Lever

Original Trip Lever Lever only: the spring and pin are not included This is the part that is attached to the trigger assembly that serves to trip the sear & sear lever in semi auto.  

MG34 Sear

Original Sear

MG34 Trigger Spring

Reproduction copy of original Trigger Spring: This is the spring that rests on the trigger spring base (fenderknoph) and inside the back of the trigger itself

MG34 Grip Hanger Pin - Right (Repro)

Top Grip Hanger Pin: Right Side, 1 piece Reproduction  Dark Grey Parkerized Finish

MG34 Grip Hanger Pin - Left (Repro)

Top Grip Hanger Pin: Left Side, 1 piece   Reproduction  Dark Grey Parkerized Finish

Trigger Housing Ejection Port Release Spring & Pin

Original Items:  includes spring and pin   This is the parts that attached to the upper front of the MG34 trigger pack and releases/opens the ejection port when the trigger is pulled.

(Repro) MG34 Trigger Spring Base: fenderknoph

Reproduction: made from stainless steel   Spring base only.  Spring not included.

MG34 Sear Spring - New Production

Copy of original Sear Spring.   Pictured is a comparison between our new sear sprign and a worn original sear spring.   This part is incredibly important to full auto guns.  It helps prevent 'stutter-stop' and 'runaway' malfunctions.

MG34 Ejection Port Cover (ROD ONLY)

Newly made mounting rod/pin for MG34 ejection port cover.

MG34/42 Trigger Housing Pins (1 male, 1 female), Nazi Marked Pin and Sleeve

Trigger Housing Mount Pins: mounts trigger housing to receiver Pin and sleeve are NAZI marked  

MG34 Sear Assembly

Original Sear with Spring and Pin, & Sear Lever with Pin in good-excellent condition.

MG34 Grip Screw Tools

Set of specially made 1/4 in. drive bits fitted to the size of the MG34 grip screw and nut.

MG34 Grip Screw/Nut

New Production Grip Screws to Original Specifications. 1 screw and 1 nut per set. Each trigger pack requires 2 sets.   Reproduction  Dark Grey Parkerized Finish

MG34/42 Trigger Housing Pin Tools (Stainless)

MG-34/42 Trigger Housing Pin Punch Set. A must have for all MG34 and MG42 owners. The Pin Start tool has a conical lead-in that precisely compresses the 'male' 34/42 trigger housing pin spring tabs. The Pin Follower tool pushes the 'male' pin through the...