STG U9 Spare Parts

STG Universal Charging Handle - Hook Pattern

STG Hook Pattern Charging Handle for: STG Universal STG 76 STG 76W STG 34k STG 43 Stemple Suomi

Stemple Trunion Assembly - Slide Lock Pattern

Standard replacement Trunion Assembly for Stemple STG Standard Bolt Setups without pin mounts: Includes trunion, ejector, locking piece, locking pin, and spacer. Compatible with U9, 76, Stemple Suomi & 34k Stemple 76/45 setups without trunion mount...

STG Universal Charging Handle - Round Pattern

STG Round Pattern Charging Handle for: STG Universal STG 76 STG 76W STG 34k STG 43 Stemple Suomi

BRP STG T Shirt by Nine Line

BRP STG T-Shirt by Nine Line  Black Shirt With White Artwork

Slide Lock Trunion: Trunion Body with Ejector

Trunion Body with Ejector for Slide Lock Trunion Assembly   Compatible with Stemple STG Standard Bolt Setups Slide Lock Trunion systems

Slide Lock Trunion: Locking Piece

Locking Piece for Slide Lock Trunion Assembly   Compatible with Stemple STG Standard Bolt Setups Slide Lock Trunion systems

Internally Threaded Pattern (ITP) and Slide Lock Trunion: Locking Pin

Trunion Locking Pin for Slide Lock Trunion Assembly and Internally Treaded Patter (ITP) setups   Compatible with Stemple STG Standard Bolt Setups Slide Lock Trunion systems

Slide Lock Trunion: Spacer - Stainless Steel

Spacer (.030) for Slide Lock Trunion Assembly Stainless Steel   Compatible with Stemple STG Standard Bolt Setups Slide Lock Trunion systems

U Lower Assembly - Nib Plated

Standard U Lower Assembly for use with all U9, U9SF and U45.  The select-fire trigger pack is installed and timed for use with Standard Universal setups.   Also Includes: Rear Takedown Pin Rear Takedown Pin Support Block AR Takedown Push...

STG Universal Rear Takedown Pin for Lowers with AR Push Pin

STG Universal Rear Takedown Pin for Lowers with AR Push Pin for post-2020 Universal Fire Control Groups   The Rear Takedown Pin secures the Receiver Assembly to the Lower Housing Assembly via an AR Takedown Push Pin.  A 6-32 set screw retains...

STG Universal Rear Takedown Pin SHIM for Lowers with AR Push Pin

.001 thick Shim for tightening the fit of the STG Universal Rear Takedown Pin to Universal Fire Control Groups with AR Push Pins for post-2020  

Rear Takedown Pin Support Block for Lowers with AR Push Pin

STG Universal Rear Takedown Pin Support Block for Lowers with AR Push Pin in post-2020 Universal Fire Control Groups   The Rear Takedown Pin Support Block and Pin is reversible to accommodate for both types of Stemple 76/45 Receiver rear hole...

STG Universal 9mm Bolt for standard rate ( with NiB One™ plating)

Original STG Universal 9mm Bolt with Extractor for STG Universal (STG-U) (standard-rate system / full round) For use with: All U9s U9SF - ITP setups   NiB One™ plating This is an electroless NIB nickel-boron plating system that is...

Folding Universal Slow Fire Stock and Buffer Assembly for ITP Setups

Law Tactical Folding Stock and Buffer Assembly for Stemple 76/45 Internally Threaded Pattern (ITP) Receivers. This setup is also used for the adjustable bolt system.   Includes: Buffer Body (ITP spec) with Law Tactical Folding Stock...

Universal Slow Fire Stock and Buffer Assembly for ITP Setups

Standard Replacement Stock and Buffer Assembly for Stemple 76/45 Internally Threaded Pattern (ITP) Receivers. This setup is also used for the adjustable bolt system.   Includes: Buffer Body (ITP spec) BRP...

U9 Folding Stock and Buffer Assembly - for ITP Setups

Standard Replacement Stock and Buffer Assembly U9 for Stemple 76/45 Internally Threaded Pattern (ITP) Receivers. This setup is also used for the fast-firing (RF-0) 9mm setup in the adjustable bolt system. Contact us with your serial number to determine...

Double Picatinny Tripod Adapter

This machined steel mount adapter is designed to attached two firearms with Picatinny rails to MG3 AA mounts, M240 pintles, M60 gooseneck pintles, and Browning pintles with .557" diameter pins.   Set Includes:  Steel Front Arm Assembly with...

ALUMINUM Bolt Extension with Law Tactical Adapter for ITP Setups

ALUMINUM - CAR Length Bolt Extension with Law Tactical Adapter for STG Universal Internally Threaded Pattern (ITP) U9SF, U45, & U762. The Law Tactical folding stock adapters add approximately 1.3" to the overall length of the bolt stroke...

ALUMINUM Bolt Extension for ITP Setups

ALUMINUM - CAR Length Bolt Extension for STG Universal Internally Threaded Pattern (ITP) U9SF, U45, & U762    Reference Chart

Adjustable Bolt System - ALUMINUM Bolt Extension for CAR

ALUMINUM - CAR Length Bolt Extension for STG Universal Heavy Bolt System U9SF, U45, & U762 This lighter bolt extension is typically necessary for proper function with weak 9mm ammo running in the Heavy Bolt System   Reference Chart...

Adjustable Bolt System - STEEL Bolt Extension for CAR

Steel - CAR Length Bolt Extension for STG Universal Heavy Bolt System U9SF, U45, & U762   Reference Chart Below

Extension Adapter for Law Tactical Folding Stock Sets

The Law Tactical folding stock adapters add approximately 1.3" to the overall length of the bolt stroke.  This part screws into the rear of the Universal bolt extensions for use with Law Tactical folding stock sets.

STG Universal Barrel Shroud - Steel 7.5"

STG Universal barrel shroud for 4 lug trunions Fits all STG barrels greater than 8.5" long Material: Steel Finish: Black Oxide OAL: 7.5" Front sight position to match use with BRP-modified KP31 tangent rear sights on Stemple Suomi and STG76 10-32...

KP31 Shroud Shim - .01" thick

Copied from original parts and made from stainless steel.   Thickness .01"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

S7 - STG Universal Extractor with Spring and Pin

Newly manufactured extractor for all Universal configurations: U9, 34k, Stemple-Suomi, STG 76, U9SF, U45, U762, and post-2020 STG 1928s   Includes extra power Wolfe spring and mounting pin.   Unlike the AR pattern extractors this has a more...

U9 8.64" barrel threaded 1/2"-28

9mm  8.64" long barrel  Stainless Steel Threaded .1/2"-28 on end For use on 2010 pattern shroud  (see reference pic)

U Lower Assembly - Black

Standard U Lower Assembly for use with U9, U9SF and U45 Black anodized finish

STG Universal Barrel Shroud with Extra Rail (NiB Plated)

STG Universal quad rail barrel shroud for 10", 10.35" and 16" barrels:   The bottom rail in machined into the shroud.  1 accessory is included.  Accessory rails can be attached to the top, left and right of the shroud.  Extra...

STG U Magazine Housing (complete) NiB Plated

Standard replacement magazine housing for 2011 and later pattern Universal setups -  (U9 and U9SF STG platforms) This is a complete magazine housing for 1.375" OD Stemple 76/45 Receiver to allow use with Finnish and Swedish pattern 9mm drums and...

Hydraulic Buffer for Universal Adjustable Bolt System

Hydraulic Buffer for adjustable bolt system STG setups.

1/2" - 28 thread extension 1" long

Steel Thread Extension for 1/2" - 28 Threaded U9, U7.62 & 34k barrel  Features wrench flats for easy removal. (9/16" wrench) OAL: 1.4" Extends threads by 1"

578" - 28 thread extension

Stainless Steel Thread Extension for 578" - 28 Threaded U9 and U45 Barrels.    Features wrench flats for easy removal. (3/4 wrench)   OAL: 1.2" Extends threads by .7"

STG Vinyl Stickers 2" x 2"

2" x 2" vinyl sticker

U9SF & U45 Manual - (hard copy 36 pages)

Stemple 76/45 - Stemple Takedown Gun U45/U9SF manual hard copy - 36 pages

KP31 Shroud Shim - .002" thick

Copied from original parts and made from stainless steel.   Thickness .002"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

Ejector U45, U9SF, U7.62

Standard replacement ejector for Stemple STG pattern trunions:  STG U45, U9SF, U7.62 Includes ejector blade and retaining pins.

STG Universal Barrel Shroud with Extra Rail (Black Anodized)

STG Universal quad rail barrel shroud for 10", 10.35" and 16" barrels:   The bottom rail in machined into the shroud.  1 accessory is included.  Accessory rails can be attached to the top, left and right of the shroud.  Extra...

Stemple STG Spade Grip Kit for STG U9SF, U45, & U7.62

Spade grip adapter setup for Stemple machine guns with heavy bolt systems with CAR pattern stocks.   Includes: rear grip assembly, trigger bar, and trigger adapter   Installation Instructions   Mounting Adapters For...

U9 10.35" barrel threaded 1/2"-28

9mm  10.35" long barrel  Stainless Steel Threaded .1/2"-28 on end

Suomi 36 rd stick magazine

36rd original Finnish Suomi drum. Works with M31/KP31, KP44, M37/39, M45. (not for sale where prohibited) Excellent condition       MAGAZINE SHIPPING RESTRICTIONS   California Restrictions: 10 rounds, unless you can...

Suomi KP31, Swed M37, Stemple U9 Trigger Pack Sear Spring

M31 Trigger Pack Sear Spring for original KP31 and Stemple U series guns with Suomi pattern trigger packs

KP31 Barrel Shim - .001 thick

Copied from original parts and made from stainless steel.   Thickness .001"    These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.   This part tightens the barrel...

1/2" - 28 thread protector

Stainless Steel Thread Protector & Flash Hider for 1/2" - 28 Threaded for U9 and U7.62 10" and 16" barrels   Features wrench flats for easy removal.

U9 Folding Stock and Buffer Assembly - Pattern 1

Standard Replacement Stock and Buffer Assembly U9 for Stemple 76/45 pattern 1 setups Contact us with your serial number to determine compatibility. (info@brpguns.com, 678-425-9585)   Includes: Ace Short Stock (AKFX) .5" Rubber Butt...

Picatinny Rail for Shroud

Picatinny Rail for MN shroud and Suomi Shrouds that have been drill and tapped by BRP   3x Mount Screws included

U9 10.35" barrel threaded .578"-28

9mm  10.35" long barrel  Stainless Steel Threaded .578"-28 on end

Universal Front Takedown Pin

Standard HK Small Pin used as front takedown pin for the U9, U9SF, U45, U7.62, STG76 and Stemple Suomi

578" - 28 thread protector

Stainless Steel Thread Protector & Flash Hider for 578" - 28 Threaded U9 and U45 Barrels.    Features wrench flats for easy removal.

KP31 Shroud Shim - .005" thick

Copied from original parts and made from stainless steel.   Thickness .005"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

Mainspring STG U9, 34k, & Suomi - New Production

New Production Mainspring for Suomi KP31, Swed M37, STG 76, Stemple Suomi, STG U9, STG 34k

Stemple STG 9mm Barrel 12.75"

12.75" barrel for BRP Stemple Takedown Guns.     Extractor Location The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for full auto and semi auto...

Stemple STG 9mm Barrel 16" Threaded 1/2-28

16" barrel for BRP Stemple Takedown Guns.  Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".   Extractor Location The extractor relief on this barrel is setup for the...