MG34 Tools and Accessories

MG34 Blank Fire Booster Cone with Three Restrictor Screws

MG34 Booster Cone For Blank Firing. Includes: • Cone Threaded 7/16-20.   • Three Restrictor Screws: - 1/8" through hole: This is for more powerful blanks. - 1/16" though hole: This setups worked well with British L13A1 blanks...

Blank Fire Booster Cone Plug - .0625 Orifice

Blank Fire Booster Cone Plug .0625" (1/16")  Orifice Includes: •  Threaded 7/16-20 • 1/16" through hole • 1/2" wrench flats • Material: 303 stainless

Blank Fire Booster Cone Plug - .125 Orifice

Blank Fire Booster Cone Plug .125" (1/8")  Orifice Includes: •  Threaded 7/16-20 • 1/8" through hole • 1/2" wrench flats • Material: 303 stainless

MG-34 Pin set

All of the pins are newly manufactured. Countersunk on both ends, just as the originasl, for peening. Includes: 1 x Buffer Latch Pin 1 x Sear Lever Pin 1 X Recuperator Retaining Pin 1 x Top Cover Hinge Retaining Pin Finish: Black

MG-34 Top Cover Hinge - SPRING only

This is a reproduction of the MG34 top cover hinge spring.  Includes spring only Material: Steel Finish: Black Oxide

MG-34 Top Cover Hinge Pin Assembly

This is a reproduction of the MG34 top cover hinge pin, retaining pin, and spring.  Material: Steel Finish: Black Oxide

MG-34 Top Cover Hinge Pin

This is a reproduction of the MG34 top cover hinge pin.  The spring and retaining pin are not included.  Material: Steel Finish: Black Oxide

MG-34 Buffer Latch Retaining Pin

This is a reproduction of the retaining pin for the buffer latch.  The same pin is used for retaining the sear lever.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG-34 Sear Lever Pin

This is a reproduction of the retaining pin for the sear lever.  The same pin is used for retaining the buffer latch.  It is countersunk on both ends, just as the original, for peening.     Finish: Black

MG-34 Bolt Catch Lever Pin

This is a reproduction of the retaining pin for the bolt catch lever in the barrel jacket.  The same pin is used for the top cover hinge retaining pin.  It is countersunk on both ends, just as the original, for peening...

MG34 Bolt Catch Lever Spring

Reproduction Spring for the Bolt Catch Lever in the Barrel Jacket   This is a critical part of the Bolt Latch assembly that prevents the bolt from prematurely unlocking.  This spring provides pressure for the pivoting latch that catches the...

MG42 / XMG Front Tripod Mount

MG-42 front tripod mount drilled and counterbored for 6-32 screws (included)   This is the part we install on the MG34 barrel jacket to adapt our XMG rifles to the MG3 ground mount.   Steel with Parkerized Finish

MG-34 Top Cover Hinge Retaining Pin

This is a reproduction of the retaining pin for the top cover hinge pin.  The same pin is used for the bolt catch lever in the barrel jacket.  It is countersunk on both ends, just as the original, for peening.    Finish: Black

MG34 Charging Handle Front Spring Tab - Newly Made

Newly Made Item   MG34 Charging Handle Front Spring Tab with Mounting Screws   For use with BRP-made cocking pieces that are threaded 6-32.  For installation and alignment of this part, it's best to tighten the mounting...

MG34 Charging Handle - Newly Made

Newly Made Item   Complete MG34 Charging Handle Assembly   Finding original MG34 charging handles can be very difficult nowadays.  Even if you have a nice original handle on your gun, why risk damaging this rare and...

MG34 Charging Handle Cocking Piece - Newly Made

Newly Made Item   This is a machined and hardened steel replacement part for the MG34 charging handle.  The cocking piece is the part that contacts the bolt carrier to charge the gun. Rather than being held by 2 rivets, we have made this...

MG34 and MG42 Barrel Headspacing Shim

Headspacing shim for MG34 or MG42 Barrels.  The shim fits between the shoulder on the barrel and the locking collar to add locking headspace to the barrel assembly .003 Thick Stainless Steel     BE SURE TO CHECK YOUR...

MG34 Enlarged Booster Cone (Slow Fire)

Enlarged diameter booster cone for reduced cycling pressure. Useful part to slow down an 8mm MG34.  By having a larger diameter opening in the front (.450" - approx 11.5 mm) compared to a standard German WW2 booster cone, more pressure is released...

MG34 308 Booster

Reduced diameter & thicker wall booster cone  Material: Stainless Steel Useful part for a weak-cycling 8mm gun or 308 conversion.   The MG34 is a Short-Recoil operated gun.  When the bullet reaches the muzzle, the recoil and excess...

Low Grade Nazi marked: Laufschützer 34, MG34 barrel carrier (unconverted)

Original Item: MG34 Barrel Carrier (Laufschützer 34)  Not the actual item pictured NOT CONVERTED FOR USE WITH MG42 BARRELS Production Variations: * Some were manufactured with the holdopen bar and some were not. * Some have aluminum insert...

Nazi marked: Laufschützer 34, MG34 barrel carrier (unconverted)

Original Item: MG34 Barrel Carrier (Laufschützer 34)    NOT CONVERTED FOR USE WITH MG42 BARRELS Production Variations: * Some were manufactured with the holdopen bar and some were not.  * Some have aluminum insert and some have...

Lot 240621-08: Nazi marked: Laufschützer 34, MG34 & MG42 barrel carrier (converted) With MG34 Barrel

Orignal ItemsActual Items PicturedCondition As Shown SHIPS FREE IN LOWER 48.... BE SURE TO SELECT FREE SHIPPING AT CHECKOUT   Lot Includes: Original Barrel Carrier with Original Sling and German Markings "brc" (repainted Yugo green) 8mm...

Low Grade Nazi marked: Laufschützer 34, MG34 & MG42 barrel carrier (converted)

Original Item with WW2 German Markings: MG34 Barrel Carrier (Laufschützer 34) later converted for use with both MG34 and MG42 barrels. Note the rectangular sheet metal modification to accommodate the wider MG42 barrel collar.   CONVERTED FOR...

Nazi marked: Laufschützer 34, MG34 & MG42 barrel carrier (converted)

Original Item with WW2 German Markings: MG34 Barrel Carrier (Laufschützer 34) later converted for use with both MG34 and MG42 barrels. Note the rectangular sheet metal modification to accommodate the wider MG42 barrel collar.   CONVERTED FOR...

Low Grade Nazi marked: Laufschützer 43/1, MG34 & MG42 dual purpose barrel carrier (ribbed)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - Rare Ribbed Pattern Not the actual item pictured     FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were...

Low Grade Nazi marked: Laufschützer 43, MG34 & MG42 dual purpose barrel carrier (smooth)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - smooth pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings may...

Nazi marked: Laufschützer 43, MG34 & MG42 dual purpose barrel carrier (smooth)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - smooth pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings may...

Nazi marked: Laufschützer 43/1, MG34 & MG42 dual purpose barrel carrier (ribbed)

Original Item with WW2 German Markings: MG34 & MG42 Dual Purpose Barrel Carrier - Rare Ribbed Pattern   FOR USE WITH BOTH MG34 & MG42 BARRELS   These came out of Yugoslav arsenals and were typically repainted after WW2.  Slings...

MG 34/42/53 Round Brass Oiler - Yugo

Original Item: Used in Gunner Kits and Pouches

ORIGINAL hqu WW2 Marked MG34/42 Basket Drum (FAIR/GOOD, Yugo repainted)

ORIGINAL ITEMS   Includes: 1 x  Yugo repainted original WW2 drum with "hqu" marking (Gurttrommel).  MARKING: "hqu 41" (Markes & Co., K.-G., Metallwarenfabrik u. Apparatebau, Luedenscheid, 1941) MARKINGS ARE VERY WEAK AND...

Lot 240828-03: Rare Variation ORIGINAL WW2 Marked MG34/42 Basket Drum (Yugo repainted)

Actual item Pictured  Condition As Shown   Includes: 1 x Drum: Marking WC43 (Hasag, Hugo Schneider AG, Meuselwitz plant, Thuringia) 1943 Late variation with spring loaded dust cover (see page 406 of "MG-34/42 Universal Machineguns, V1"...

MG34 Bolt Extractor Tool

Original tool.   Very good condition with minor blemishes Inspected for proper function No markings  

MG34/42 Basket Drum (Yugo) - Good Condition

Yugo 50 rd Basket Drum.  Good Condition - minor blemishes but in good working order.   These are ideal for repainting in German colors. RAL 7021 is the grey Y5233-A is the tan (Dupont Centari) Repainting Info: http://www.mg42...

MG34 Mount Adapter for MG42/53 Lafette Tripod and M60 Pintle

Finding and MG34 tripod can be very difficult and expensive.  This adapter set allows a standard MG34 to fit and function on an MG42 or M53 lafette (tripod) as well as an M60 “gooseneck” pintle.   This adapter set...

MG34 and MG42 Trigger Housing Pins (1 male, 1 female) - Newly Made

Trigger Housing Mount Pins: mounts trigger housing to receiver Newly Made Items Copied from the Original German Design Black Oxide Finish Includes:  1 Male Pin 1 Female Pin Finding original MG34/MG42 trigger housing pins can be...

MG34 Mount Adapter for MG3 Tripod and M60 Pintle

Finding and MG34 tripod can be very difficult and expensive.  This adapter set allows a standard MG34 to fit and function on an unmodified** MG3 lafette (tripod) as well as an M60 “gooseneck” pintle.   On the MG3 tripod the...

MG34 Action Cover (Short Length)

Yugo mfg:   Although designed for the MG34, it also fits an AK-47 nicely.   This pattern closely resembles the German WW2 pattern

MG34 Muzzle Cover - Original (Frayed Pull-Strings)

Original Item: 1 piece included Rare find of original WW2 rubberized canvas muzzle cover with string tie commonly found in MG34 gunner kits. These are designed to be shot through for immediate use. Condition: new old stock

Metric M4 to English 8-32 Cleaning Rod Adapter

Brass Cleaning Rod Adapter     For use with any bore over:  .238"OD / 6.1mm OD  Length: 1"     Female threaded on both ends:   One end is threaded 8-32 for standard US pattern cleaning brushes by Hoppes,...

MG-34 Brass Catcher - LOW GRADE

Original Item: Yugo mfg.  Has moderate rust and blemishes similar to pics

MG34 Action Cover (Normal Length)

Yugo mfg:   This length does NOT work on the AK-47.  However, the long length works very well on the AK-47. The "Hand Select" grade is in excellent condition all around.  Minor stains on canvas, if any.  No rust on buckles. ...

MG34 Action Cover (Long Length)

Yugo mfg:   Although designed for the MG34, it also fits an AK-47 nicely. The "Good" grade cover has good - excellent canvas (minor stains), leather, and may have minor rust on buckles. The "Low" grade cover can be greasy, have minor tears,...

Original WW2 MG34/42 Basket Drum - LOW GRADE

LOW GRADE German WW2 50 rd Basket Drum.  (Yugo repainted with rusty spots and bends). Markings vary. May require some re-shaping to work properly.     These are ideal for repainting in German colors. RAL 7021 is the grey Y5233-A is...

MG34/42 Basket Drum (Yugo) - LOW GRADE

LOW GRADE (rust, pitting, bends, trench art, replacement parts, loose carry handle, etc) but functional Yugo 50 rd Basket Drum.    These are ideal for repainting in German colors. RAL 7021 is the grey Y5233-A is the tan (Dupont...

MG34 - MG42 - M53 Broken Shell Tool

Original Item: Excellent condition - Yugo Manufacture  

MG-34, MG42, M53 Hot Barrel Mit; Yugo, Glove Type - Minor Stains

- Yugoslavian Manufactured - Full Glove Type - Some Stains - generally as pictured.

MG 34/42 Jag Tool

MG34 Gunner's Pouch

Yugo mfg: MG34 Gunner’s Pouch   Original Items: yugo mfg - pouch - brass catcher (HAS  MODERATE RUSTING AND/OR PITTING) - hot barrel mitt (glove or pad) - jag  - cleaning rod - chamber brush - pick - 2 oil bottles -...

Rare Variation ORIGINAL WW2 Marked MG34/42 Basket Drum (Yugo repainted)

Late variation with spring loaded dust cover (see page 406 of "MG-34/42 Universal Machineguns, V1" by Myrvang) Yugo repainted original WW2 drum (Gurttrommel).   These are ideal for repainting in German colors. RAL 7021 is the grey Y5233-A is...

Late War WW2 Marked MG34/42 Basket Drum (Yugo repainted)

Simplified variation of the Gurttrommel    *note the absence of the nut on the center rear.   These are ideal for repainting in German colors. RAL 7021 is the grey Y5233-A is the tan (Dupont Centari) Repainting Info: http://www...

ORIGINAL WW2 Marked MG34/42 Basket Drum (Yugo repainted)

Yugo repainted orignal WW2 drums (Gurttrommel). We had to scrape some of the Yugo paint to reveal the markings as pictured. Various Markings Available If there are any wartime markings you are looking for, please let us know.  Most are ddf...

Yugo MG34 Sling - Split Style WW2 Copy

Original Item:   Yugo sling for MG34