Shop by Category

Shop by Brand

Shop by Brand

U762 Spare Parts & Accessories

Parts and Accessories for the Stemple Takdeown Gun (STG) U762x25

disassembly43.jpg

 

 

  • STG Universal Barrel Shroud - Steel 7.5" STG Universal Barrel Shroud - Steel 7.5"

    STG Universal Barrel Shroud - Steel 7.5"

    STG Universal barrel shroud for 4 lug trunions.  Loosely patterned after the Swedish M37 short-barreled Suomi setup. Fits all STG barrels greater than 8" long Material: Steel Finish: Black Oxide or Parkerized (grey) - Please Specify OAL: 7...

    $275.00
    Choose Options
  • STG Universal Buffer and Key Plate Shim STG Universal Buffer and Key Plate Shim

    STG Universal Buffer and Key Plate Shim

    Included 1 x .003" thick Shim for: 1) Tightening the fit of the STG Buffer-to-Receiver fit.   2) Spacing the Key Plate rearward so it bottoms on the Buffer when the Castle Nut is tightened rather than the Lower Assembly.  If the Key Plate...

    $4.00
    Add to Cart
  • Buffer Body for ITP Setups Buffer Body for ITP Setups

    Buffer Body for ITP Setups

    Includes: Stripped Steel Buffer Body for ITP Setups and Sealing Ring * Parkerized Finish The rear threads are setup for standard AR and AR Carbine pattern buffer tubes. The Sealing Ring can be added to the the groove to make a...

    $55.00
    Add to Cart
  • STEEL Bolt Extension for ITP Setups STEEL Bolt Extension for ITP Setups

    STEEL Bolt Extension for ITP Setups

    STEEL - CAR Length Bolt Extension for STG Universal Internally Threaded Pattern (ITP) U9SF, U45, & U762 This is the heavier extension for lower rates. This is typically used with the 45 and 7.62 setups.  It can also be used with the 9mm setup...

    $60.00
    Add to Cart
  • Double Picatinny Tripod Adapter Double Picatinny Tripod Adapter

    Double Picatinny Tripod Adapter

    This machined steel mount adapter is designed to attached two firearms with Picatinny rails to MG3 AA mounts, M240 pintles, M60 gooseneck pintles, and Browning pintles with .557" diameter pins.   Set Includes:  Steel Front Arm Assembly with...

    $550.00
    Add to Cart
  • SALE
    Adjustable Bolt System - ALUMINUM Bolt Extension for CAR

    Adjustable Bolt System - ALUMINUM Bolt Extension for CAR

    ALUMINUM - CAR Length Bolt Extension for STG Universal Heavy Bolt System U9SF, U45, & U762 This lighter bolt extension is typically necessary for proper function with weak 9mm ammo running in the Heavy Bolt System   Reference Chart...

    Was: $60.00
    Now: $47.50
    Add to Cart
  • Spare Bottom Foam for STG Universal Case Spare Bottom Foam for STG Universal Case

    Spare Bottom Foam for STG Universal Case

    STG Universal Case Bottom Foam Adhesive backing can be used if desired by peeling the white cover. Cutouts for: M3 45acp mags x 2 kp31 drums x 2 kp31 mags x 2 universal mag housing - any type spare bolt bolt extension 10" barrel  without...

    $25.00
    Add to Cart
  • KP31 Barrel Spacer For Use on Stemple STG Setups KP31 Barrel Spacer For Use on Stemple STG Setups

    KP31 Barrel Spacer For Use on Stemple STG Setups

    Given the difference between the Receiver and Trunion of an original KP31 and the Stemple 76/45, a Barrel Spacer that is approximately .4” long is necessary to use original KP31 Barrel Shrouds with the Stemple STG setups. Additional Barrel Shims...

    $12.75
    Add to Cart
  • Ejector U9 - 3 Pin

    Ejector U9 - 3 Pin

    Standard replacement ejector compatible with Stemple STG ITP pattern trunions:  Used with the STG U9SF Setup. Includes ejector blade and retaining pins. A faster bolt speed is necessary to ensure proper ejection with 9mm ammo with the standard U45...

    $14.00
    Add to Cart
  • KP31 Shroud Shim - .01" thick KP31 Shroud Shim - .01" thick

    KP31 Shroud Shim - .01" thick

    Copied from original parts and made from stainless steel.   Thickness .01"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

    $4.85
    Add to Cart
  • S7 - STG Universal Extractor with Spring and Pin S7 - STG Universal Extractor with Spring and Pin

    S7 - STG Universal Extractor with Spring and Pin

    Newly manufactured extractor for all Universal configurations: U9, 34k, Stemple-Suomi, STG 76, U9SF, U45, U762, and post-2020 STG 1928s   Includes extra power Wolff spring and mounting pin.   Unlike the AR pattern extractors this has a more...

    $35.00
    Add to Cart
  • 1/2" - 28 thread extension 1" long

    1/2" - 28 thread extension 1" long

    Steel Thread Extension for 1/2" - 28 Threaded U9, U7.62 & 34k barrel  Features wrench flats for easy removal. (9/16" wrench) OAL: 1.4" Extends threads by 1"

    $21.00
    Add to Cart
  • 578" - 28 thread extension 578" - 28 thread extension

    578" - 28 thread extension

    Stainless Steel Thread Extension for 578" - 28 Threaded U9 and U45 Barrels.    Features wrench flats for easy removal. (3/4 wrench)   OAL: 1.2" Extends threads by .7"

    $25.00
    View Details
  • KP31 Shroud Shim - .002" thick KP31 Shroud Shim - .002" thick

    KP31 Shroud Shim - .002" thick

    Copied from original parts and made from stainless steel.   Thickness .002"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

    $4.85
    Add to Cart
  • Ejector U45, U9SF, U7.62

    Ejector U45, U9SF, U7.62

    Standard replacement ejector for Stemple STG pattern trunions:  STG U45, U9SF, U7.62 Includes ejector blade and retaining pins.

    $14.00
    Add to Cart
  • KP31 Barrel Shim - .001 thick KP31 Barrel Shim - .001 thick

    KP31 Barrel Shim - .001 thick

    Copied from original parts and made from stainless steel.   Thickness .001"    These are the most thin we could make.  They are excellent for fine tuning your barrel to trunion to shroud fit.   This part tightens the barrel...

    $2.75
    Add to Cart
  • 1/2" - 28 thread protector

    1/2" - 28 thread protector

    Stainless Steel Thread Protector & Flash Hider for 1/2" - 28 Threaded for U9 and U7.62 10" and 16" barrels   Features wrench flats for easy removal.

    $25.00
    Add to Cart
  • 578" - 28 thread protector 578" - 28 thread protector

    578" - 28 thread protector

    Stainless Steel Thread Protector & Flash Hider for 578" - 28 Threaded U9 and U45 Barrels.    Features wrench flats for easy removal.

    $25.00
    Add to Cart
  • KP31 Shroud Shim - .005" thick KP31 Shroud Shim - .005" thick

    KP31 Shroud Shim - .005" thick

    Copied from original parts and made from stainless steel.   Thickness .005"   This part tightens the barrel jacket to receiver fit by 'shimming' the rear of the barrel shroud to receiver/trunion.   This is a very useful part for...

    $4.85
    Add to Cart
  • Stemple STG 9mm Barrel 12.75" Stemple STG 9mm Barrel 12.75"

    Stemple STG 9mm Barrel 12.75"

    12.75" barrel for BRP Stemple Takedown Guns.  FULL AUTO CHAMBER SPEC.   Extractor Location The extractor relief on this barrel is setup for the BRP-Stemple extractors and would have to be enlarged to accommodate the KP31 extractor for...

    $160.00
    Add to Cart
  • Stemple STG 9mm Barrel 16" Threaded 1/2-28 Stemple STG 9mm Barrel 16" Threaded 1/2-28

    Stemple STG 9mm Barrel 16" Threaded 1/2-28

    16" barrel for BRP Stemple Takedown Guns.  Works with slant pattern KP31 shroud.  Will work with compensated shroud if the exit hole is opened to .635".   Extractor Location The extractor relief on this barrel is setup for the...

    $135.00
    View Details
  • PIAT Cleaning Brush PIAT Cleaning Brush

    PIAT Cleaning Brush

    Original PIAT bristle brush. Approximately 12" long with 1.5" diameter brush.      Also, very useful for cleaning the inside of MG34 & MG42 barrel jackets, and BREN receivers.

    $4.50
    Add to Cart
  • STG Combo Wrench

    STG Combo Wrench

    Barrel tool with fitted socket for STG Barrel Locknuts, 3/4 wrench for removing the flash-hider, and spanner for suppressor disassembly.

    $45.00
    Add to Cart
  • PPS43 Magazine

    PPS43 Magazine

    Standard PPS43 Magazine.   Also works with BRP/STEMPLE STG43 Not for sale where prohibited. Takes 7.62 x .25 We also use these with 9mm Luger ammunition in the STG43 setup as well.  Customers have reported that they do not work with...

    $25.00
    Add to Cart
  • STG 43 Screw and Pin Kit

    Screws, Spring, and Pin Set for STG 43 Lower Housing.   Includes: 1:  8-32 X  .25 socket set screw  1:  8-32 X  .5 socket set screw  6:  8-32 X 3/8 low head  1: .25 X .875 long dowel  1: .25 X .75...

    $10.00
    Add to Cart