Lot: 1939 dated BREN Mk1 Combination Tools -02

Original Items Actual Item Pictured Condition as shown. Marked "SFT 1939"   

Lot: 1938 dated BREN Mk1 Combination Tools -11

Original Items Actual Item Pictured Condition as shown. Marked "KB 1938"  Very rare 1938 marked BREN C tool.  *chips on bottom wrench portion as pictured 

Lot: "MONO" marked BREN Mk1 Combination Tools -10

Original Items Actual Item Pictured Condition as shown. RARE "MONO" Marking The foldout tools are stiff but can be popped out as pictured.  *chip on bottom wrench portion as pictured

Lot: "VTO" marked BREN Mk1 Combination Tools -09

Original Items Actual Item Pictured Condition as shown. Marked "VTO"   

Lot: 1939 dated BREN Mk1 Combination Tools -08

Original Items Actual Item Pictured Condition as shown. Marked "SFT 1939"   

Lot of Two Unique BREN Mk1 Combination Tools -07

Original Items Actual Items Pictured Condition as shown. One is marked "CLAUSON HAIFA"  The other has no visible markings   Both have some chips down at the bottom (see pics with red arrows)

British Bobby Helmet - original

Original British Bobby Helmet - Used by the British Police - Fair - Good Condition   Made by Christys (London, England)

(LOW GRADE) BREN Cleaning Rod Set

Original Items: All items are LOW GRADE.   - 2 Rods with sleeve - 5 Piat Brushes - 5  Soft Bristle Brushes - 10 wire brushes

British Armourer's Tool - Brace

Original Item: Brace only (Tools not included) Typically there are no markings other than a small broad head stamp somewhere on it. These are used with tools/bits that fit into the square socket on the end.     External Informational...

BREN Cleaning Rod Set

Original Items:  for gas cylinder / receiver cleaning. Includes wooden cleaning rod, 2 metal wire brushes, and 1 soft cleaning brush

Soft Bristle Brush - For BREN Cleaning Rod

Original Item

Metal Wire Bristle Brush - For BREN Cleaning Rod

Original Item

Metal Collar for Wood Rod

Original Item: with broad head stamp

SM 125 Armourers plug - Bore Reject Gauge for 303 (.307" diameter)

"SM125 Armourer's plug gauge .307" - Bore reject - Rifles No 4 & 5, inserted at muzzle end. Must not enter muzzle more than 0.25 inch. SM125 has an engraved line at the end showing this measurement. For Vickers M.G. SM125 must not enter...

BREN Mk2 Combination Tool - marked "W. Booth & Co"

Bren Tools (original): Combination Tool marked "W. Booth & Co"

Small Arms Oil Can Mk.3 Square Pattern- Low Grade

Brush-top oil can commonly issues for Bren and Vickers during WW2   Low Grade:   Dents and Rust

Small Arms Oil Can Mk.3 - Low Grade

Brush-top oil can commonly issues for Bren and Vickers during WW2   Low Grade:   Dents and Rust

SM 126 Armourers plug - Barrel Reject Gauge for 303

"SM126 Armourer's plug gauge .308" - Barrel leed wear at commencement of rifling. Vickers gun - inserted at chamber end. Must not enter more than 0.25 inch. This is indicated when the screwed end of the gauge is 0.30" proud of the breech. Rifle No. 4 -...

MN marked Clearing Plug

Original Item Actual Item Pictured   Otherwise known as a broken shell or ruptured case extractor for .303 Brit.     Machined handle type made by "MN"   From all of the clearing plugs we've seen over the years this is the only...

Collection of Four VSM Clearing Plugs

Original Items Actual Items Pictured All Marked "VSM" (Vickers, Sons & Maxim)   From all of the VSM marked tools we've seen over the years, here's a collection of the VSM variations we found.  Three of them have the machined handle, one...

Vickers, Lewis, & BREN Clearing Plug (first Pattern) Forged Handle

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Marked "VSM" (Vickers, Sons & Maxim) Forged Handle Type   All have visible manufacturer and proof markings. Commonly used for Vickers and BREN machineguns...

BREN Mk1 Combination Tool - Worn Condition

Original Item with British Markings in worn condition Maker codes vary. The copper hammer tips are mashed a bit on these but otherwise in good functional condition

BREN De-Fouling Tool

Bren Tools (original): De-Fouling Tool Combination Tool

BREN Mk2 Combination Tool

Bren Tools (original): Combination Tool

Bren Magazine Parts Lot and Tools

Magazine repair tool set.  Some surface wear but functions 1 rusted gauge pin other magazine parts as shown Magazine is low grade with some dings on the side but you’ll have the tool to repair it.  

Bren Sling Hook (brass / non-swivel) Mk1 (FAIR Cond.)

Bren Sling Hook (brass/ non-swivel) Hinge may be bent/rusted

Small Parts Tin (for wallet) - Post War - Excellent Condition

Commonly used for spares or cleaning kits with a variety of British small arms.   Post War British mfg in excellent condition.  Most are dated 1950s.  They are all painted flat green as pictured

SM 139 Armorers Headspace Gauge for 303 - .064"

Original (new in wrap) WW2 era Armourers Headspace Gauge. SM 139 – Armourers, headspace, .064 in., No. 1     They are typically used for the SMLE, BREN and Vickers to measure firing pin protrusion. .064"   Useful Info Info...

BREN Early Brush - 1 piece

Original Item: Qty: 1

BREN Mk1 Combination Tool - Very Good Condition

Original Item with British Markings in very good condition Maker codes vary.

BREN Accessory Pack (oil cans and small parts tin)

Bren Accessories (original): 1 x Small Parts Tin for Wallet 1 x plastic brush top oil bottle 1 x metal brush top oil bottle

BREN Post Mount (1.05" OD)

Original Mounting Post for BREN LMG.  It is designed to socket into a hole just over 1.05" OD.  1.05" is the diameter of the post socket. These came out of Greek arsenals are are likely for mounting a BREN LMG on vehicles or other fixed...

Bren Sling Hook (steel / non-swivel) Mk1

Bren Sling Hook (steel / non-swivel)

BREN Sling Hook - 1 pc

Original Bren Sling Hook

BREN Tool Kit

Bren Tools (original): De-Fouling Tool Combination Tool

BREN Firing Pin Protrusion Gauge

Original Item Currently only have the black top ones in stock.

PIAT Cleaning Brush

Original PIAT bristle brush. Approximately 12" long with 1.5" diameter brush.      Also, very useful for cleaning the inside of MG34 & MG42 barrel jackets, and BREN receivers.

British Double Pull-Through

Original 

British Flexible Cleaning Rod

Original flexible copper cleaning rod

Small Parts Tin (for wallet) - early pattern - low grade

Commonly used for spares or cleaning kits with a variety of British small arms.   Most have either: WW2 Date   OR   L&S markings   The are the earlier ones that are either gold in color or grey.

Small Arms Oil Can Mk.3

Brush-top oil can commonly issues for Bren and Vickers during WW2

Vickers, Lewis, & BREN Clearing Plug (first Pattern) Machined Handle

Otherwise known as a broken shell or ruptured case extractor for .303 Brit.   Early Machined Handle Type   Marked "VSM" (Vickers, Sons & Maxim)   All have visible manufacturer and proof markings. Commonly used for Vickers...

Clearing Plug (second pattern)

Otherwise known as a broken shell or ruptured case extractor for .303 Brit. Commonly used for Vickers and BREN machineguns.

Wire Gauze

Common Part for cleaning rusted bores on all Commonwealth small arms 

Bren Cover (original)

Original BREN canvas cover with WW2 markings. Various makers hand select condition pictured