210708-10: Vickers Part Lot (SHIPS Free)

Original ItemsCondition as shown Actual Items Pictured Ships Free in Lower 48 --- Be sure to select "FREE SHIPPING" at checkout     Includes: 2 x feed block: 1 striped Australian, 1 complete VSM with DP marked advancing pawl and 1916...

210708-12: Vickers Part Lot (SHIPS Free)

Original ItemsCondition as shown Actual Items Pictured Ships Free in Lower 48 --- Be sure to select "FREE SHIPPING" at checkout     Includes: 1 x Early Steel Pattern Feed Block with some crusty spots 1 x Lock assembly with some...

210708-11: Vickers Part Lot (SHIPS Free)

Original ItemsCondition as shown Actual Items Pictured Ships Free in Lower 48 --- Be sure to select "FREE SHIPPING" at checkout     Includes: 1 x Early pattern steel feed bock with some crusty spots 1 x Lock assembly with some...

210708-09: Vickers Part Lot (SHIPS Free)

Original ItemsCondition as shown Actual Items Pictured Ships Free in Lower 48 --- Be sure to select "FREE SHIPPING" at checkout     Includes: 2 x VSM feed blocks 1 x Lock assembly with some crusty spots. The lock does cock and fire...

LOT 210708-08: Vickers Part Lot (SHIPS Free)

Original ItemsCondition as shown Actual Items Pictured Ships Free in Lower 48 --- Be sure to select "FREE SHIPPING" at checkout     Includes: 2 x VSM / VAN feed blocks: interesting dual marked feed blocks 1 x Lock assembly with some...

Vickers MMG Front Sight Blade - VAN marking

Original Item: front sight blade for Vickers MMG

Vickers MMG Front Sight Blade - VSM marking

Original Item: front sight blade for Vickers MMG

Vickers Rear Sight Mk.4 - Low Grade

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN, VAC, EFD    Original Items in Low Grade Condition with wear and minor rust spot.    These have been check for proper...

Vickers Rear Sight Mk.4 - Used Good Condition

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN, VAC, EFD    Original Items in Used / Good Condition   Numbered  

Vickers "B/BSA" Machine Gun Auxiliary Mount 201106-04 - SHIPS FREE

Original Item. Actual Item Pictured. "B"marking indicating the later pattern but also early "BSA: stacked rifle logo on hinge. Shallow type knurling on the handle as seen on the early type auxiliary mounts. M/78 marking on ring     Mount...

Vickers "B" Machine Gun Auxiliary Mount 201106-03 - SHIPS FREE

Original Item. Actual Item Pictured.   Tight leather between rivets (see pics)   "B"marking indicating the later pattern Deep type knurling on the handle as seen on the later type auxiliary mounts. M/78 marking on...

Vickers "B/BSA" Machine Gun Auxiliary Mount 201106-02 - SHIPS FREE

Original Item. Actual Item Pictured. "B"marking indicating the later pattern but also early "BSA: stacked rifle logo on hinge. Deep type knurling on the handle as seen on the later type auxiliary mounts. M/78 marking on ring     Mount...

LOT 201009-14: Vickers Parts Lot

Original Item. Actual Items Pictured. Condition as shown 2 x mk1 oil bottles (condition as shown)- 1 is dated 1944, the other is marked TB and looks like the early pattern extra brushes and washers as pictured 1 x original hose - worn an cracked as...

LOT 201009-04: Vickers MMG Rear Crosspiece - Grip Assembly (SHIPS Free)

Original Item. Actual Items Pictured. Unnumbered with VAC markings.   This looks like an NOS piece, however, it did have a lot of storage wear and was cleaned up by BRP. There is some noticeable pitting is several spots that didn't cleanup during...

LOT: Vickers MMG Rear Crosspiece - Grip Assembly (SHIPS Free) 200918-03

Original Item. Actual Items Pictured. Unnumbered with VAC markings.   This looks like an NOS piece, however, it did have a lot of storage wear and was cleaned up by BRP. There is some noticeable pitting is several spots that didn't cleanup during...

LOT: Vickers MMG Rear Crosspiece - Grip Assembly (SHIPS Free) 200918-02

Original Item. Actual Items Pictured. Unnumbered with VAC markings.   This looks like an NOS piece, however, it did have a lot of storage wear and was cleaned up by BRP. There is some noticeable pitting is several spots that didn't cleanup during...

LOT: Vickers MMG Rear Crosspiece - Grip Assembly (SHIPS Free) 200918-01

Original Item. Actual Items Pictured. Unnumbered with VAC markings.   This looks like an NOS piece, however, it did have a lot of storage wear and was cleaned up by BRP. There is some noticeable pitting is several spots that didn't cleanup during...

Vickers Machine Gun Auxiliary Mount 200824-02

Original Item. Actual Item Pictured. "B"marking indicating the later pattern Also has BSA stacked rifle logo on hinge pied Shallow type knurling on the handle as seen on the earlier type auxiliary mounts. M/78 marking on ring   Some...

Vickers Eliminator (stripped & repainted)

Parabolic Blast Deflector / Eliminator (original).    Stripped and repainted flat black

Vickers Dial Sight Mounting Pin Set (all 3)

Longer setup for mounting the dial sight bracket to the left side of the Vickers MMG "T" Pin Mk II Rear Crosspiece Pin Assembly MK III (Includes Screw, Nut, & Retaining Wire) Cover Joint Pin Assembly MK V (Includes Screw, Nut, & Retaining...

Roller

Original Item:  Vickers roller  

Roller Collar

Original Item:  Vickers roller collar (retaining pin not included)

Vickers Lock Headspacing Washers No. 2 (repro), .005 Thickness

Newly made item:  common part in spare parts wallet for lock spacing   This is idential to the original except it does not have the pin punched holes to identify it as the No.2 washer.   Includes 1 x Vickers Lock Headspacing Washers No...

Vickers Lock Headspacing Washer (repro), No. 1 .003 thickness

Reproduction:  common part in spare parts wallet for lock spacing This is idential to the original except it does not have the pin punched single hole to identify it as the No.1 washer.   Included 1 x No. 1 Vickers Lock Headspacing Washers,...

Vickers Wallet with Spares

Original Items:complete extractor assemlby2 x mk2 firing pins2 x mk2 lock springstrigger pin, triggertumblersearrear cover spring lockMk2 muzzle coverMk2 broken shell extractorParts are in excellent conditionThe leather wallets are very low grade. ...

Vickers 303 Barrel (excellent condition)

Original Barrels in excellent condition Australian (MA)

Vickers Safety Spring Assy

original item:

Vickers "T" Pin Mk I

Short type pin for retaining the rear grip assembly.

Vickers Lock Headspacing Washers No. 2 (.005 Thickness)

original item:  common part in spare parts wallet for lock spacing   Includes 1 x Vickers Lock Headspacing Washers No. 2 (.005 Thickness)   From “Handbook of the Vickers Machine Gun”    Test lock for excessive...

RUSTED Crank Handle and Knob, Vickers MMG

Original Item: Low Grade with rust

Vickers Split Pin

original item: common part in spare parts chest    1"  for crank handle, roller   2 1/2" for Mk 4 Tripod Mounting   Specify Type

Vickers Lock Headspacing Washers, No. 1 .003 thickness

original item:  common part in spare parts wallet for lock spacing   Included 1 x No. 1 Vickers Lock Headspacing Washers, No. 1 .003 thickness   From “Handbook of the Vickers Machine Gun”    Test lock for...

Vickers MkIII* Rear Sight

Vickers MkIII* Rear Sight used - good condition

Tripod Chain for Crosshead Pin

This chain is for the Crosshead Pin Joint.   Condition generally as shown without any finish.   No stud or washer    

Vickers Muzzle Cup

Vickers Fusee with Chain

Vickers Spring, Fusee Assembly

Vickers "T" Pin Mk. II For Dial Sight Bracket

Longer type pin for retaining the rear grip assembly designed to work with the dial sight bracket.    

Vickers Rear Sight Mk.4 - Unnumbered Excellent Condition

Complete / Original:  Commonly included in spare parts containers   Possible Markings: VAN or VAC    Original Items in New Old Stock / Excellent condition   Unnumbered  

Vicker Tripod Elevating Gear Joint Pin (pictured bottom)

Vickers Tripod Crosshead Joint Pin (pictured top)

Original Item(s): Pin for Vicker's tripod  HAS MINOR PITTING

Vickers Eliminator

Parabolic Blast Deflector / Eliminator (original).    Standard Grade Pictured

Tripod Chain for Elevating Gear Joint Pin

This chain is used for elevating gear joint pin.   Condition generally as shown.

Chain, Muzzle Attachment

Attaches to muzzle and locks the assembly in place

Vickers Rear Cover Spring Lock

Vickers No.1 Brass Plug, Screw

Original Item: MC Marking Also fits Browning 1917

Cover Joint Pin Assembly

Included Screw, Nut, & Retaining Wire

Rear Crosspiece Pin Assembly - for dial sight bracket

Included Screw, Nut, & Retaining Wire Longer setup for dial sight bracket

Vickers Cork Plug Chain Assembly

Vickers Machine Gun Blank Firing Adapter

Original Vickers machine gun blank firing complete 5 piece set: Cone Cup Blast Screw (adjusting) Lock Nut (adjusting) Wrench

Vicker's Roller and Collar

Original Items: 2 pieces included Does NOT include the 1/8" x 1 1/4" keep pin.

19: PIN, axis, firing lever

Original Item: