SALE Quick view Details sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare
Quick view Details sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing MSRP: Now: $115.00 Add to Cart Compare Quick view Details sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing MSRP: Now: $70.00 Add to Cart Compare SALE Quick view Details sku: 230310-05 STEN MkII Parts Lot MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view Details sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated MSRP: Now: $60.00 Add to Cart Compare Quick view Details sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) MSRP: Now: $18.75 Add to Cart Compare Quick view Details sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) MSRP: Now: $28.50 View Details Compare Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing MSRP: Now: $70.00 Add to Cart Compare SALE Quick view Details sku: 230310-05 STEN MkII Parts Lot MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view Details sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated MSRP: Now: $60.00 Add to Cart Compare Quick view Details sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) MSRP: Now: $18.75 Add to Cart Compare Quick view Details sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) MSRP: Now: $28.50 View Details Compare Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
SALE Quick view Details sku: 230310-05 STEN MkII Parts Lot MSRP: Was: $315.00 Now: $270.00 View Details Compare
Quick view Details sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated MSRP: Now: $60.00 Add to Cart Compare Quick view Details sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) MSRP: Now: $18.75 Add to Cart Compare Quick view Details sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) MSRP: Now: $28.50 View Details Compare Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) MSRP: Now: $18.75 Add to Cart Compare Quick view Details sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) MSRP: Now: $28.50 View Details Compare Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) MSRP: Now: $28.50 View Details Compare Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade MSRP: Now: $30.00 View Details Compare Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut MSRP: Now: $55.00 View Details Compare Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) MSRP: Now: $50.00 Add to Cart Compare Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view Details sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) MSRP: Now: $65.00 View Details Compare SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
SALE Quick view sku: STCR-wr-stock-nut (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, Barrel Bushing, Barrel Nut and Stock Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Was: $100.00 Now: $89.95 Add to Cart Compare
Quick view sku: STCR-tabbed (FAIR) MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $115.00 Add to Cart Compare Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: STCR-wrapped (FAIR) Early Wrapped MkII Cut Receiver Parts: Fire Control Housing, Ejector, and Barrel Bushing Original Items Condition: Generally as shown (MAY HAVE RUST, PITTING) These are parts that have been cut away from the receiver. Only includes the sections shown. The 'tabbed' type Sten MkII uses Drawn Over Mandrel (DOM) receiver... MSRP: Now: $70.00 Add to Cart Compare SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
SALE Quick view sku: 230310-05 STEN MkII Parts Lot Only Includes Parts Shown and Listed Below... Not a complete kit. Includes: Mk2 Mag Housing with Catch/Retainer Assembly and Plunger with Spring Installed. (BARREL NUT CATCH NOT INCLUDED) 3 Cut receiver pieces: Stripped fire control... MSRP: Was: $315.00 Now: $270.00 View Details Compare
Quick view sku: 200221-01 Original STEN Ruptured Case Tool, WW2 dated Original WW2 Tool: mfg mark "Richards Scheffield" with a WW2 date. This is a very useful tool for clearing any 9mm chamber. MSRP: Now: $60.00 Add to Cart Compare Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: 09232011-07a-LG STEN Barrel Nut (Sleeve) Mk1 (USED- LOW GRADE) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED: Rust and dents generally as pictured. Useable condition MSRP: Now: $18.75 Add to Cart Compare Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: ST-EP-Guard Sten Ejection Port Guard (reproduction) Newly Made Item For Mk1, 2, & 5 patterns Copied form the original "guard, ejection opening" issued with the Canadian Sten, this useful accessory gives your fingers an effective resting spot and prevents your fingers from slipping into the ejection... MSRP: Now: $28.50 View Details Compare Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: 09232011-46-LG STEN Barrel Nut MK2 (early hole pattern) - low grade Original item: This was an alternate hole pattern for use with the Mk5 gun & foregrip assembly. Condition as shown. Some minor bends and blems but useable MSRP: Now: $30.00 View Details Compare Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: st-bushandnut STEN MK2 Front Barrel Bushing with Barrel Nut Original STEN Mk2 machine carbine front barrel bushing. The front sight dovetail cutout is usually marred from the disassembly.The set also includes Mk1 barrel nut in fair / good condition MSRP: Now: $55.00 View Details Compare Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: 09232011-08 STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP) Original STEN Barrel Nut (Sleeve) Mk2 (NEW IN WRAP). Commonly used on the Mk5 STEN. MSRP: Now: $50.00 Add to Cart Compare Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected × OK
Quick view sku: 09232011-07a STEN Barrel Nut (Sleeve) Mk1 (USED) Original STEN Barrel Nut (Sleeve) Mk1 commonly used on Mk2 STEN guns. USED MSRP: Now: $25.00 Add to Cart Compare Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected
Quick view sku: 09232011-07 STEN Barrel Nut (Sleeve) Mk1 (Excellent Condition) Original STEN Barrel Nut (Sleeve) Mk1 hole patter: Excellent Condition Commonly used on Mk2 STEN guns. MSRP: Now: $65.00 View Details Compare Compare Selected