No.4 Mk.1 Stock, Trigger & Magazine Parts

Lot 250314-06: Six Long Branch No4 MkI Receivers Dated 1944 (FFL Required)

Original Items Actual Items Pictured Condition as Shown: Most have blems to include dings, scratches, and  rust (see pics)   Includes: • 6 x Canadian Long Branch...

Lot 250314-05: Seven Long Branch No4 MkI Receivers Dated 1943 (FFL Required)

Original Items Actual Items Pictured Condition as Shown: Most have blems to include dings, scratches, and  rust (see pics)   Includes: • 7 x Canadian Long Branch...

No4 Low Grade Parts Lot 250509-03

Original Items Actual Items Pictures Lot Includes:  30 stock bottom caps - low grade 20 mag catches  3 trigger housings - low grade, 1 case missing loop (see pics) 6 low grade crusty bolts

No. 4 MK I Magazine - FAIR

Original British production SMLE No. 4 MK I Magazine Fair Condition  Condition is generally as shown in pictures. Some surface wear with some crusty spots on the outside.  Although the outside is a bit rough they are in good working order.

No. 4 MK I Magazine - GOOD

Original British production SMLE No. 4 MK I Magazine Good condition Condition is generally as shown in pictures. Some surface wear.

No. 4 MK I Magazine - VERY GOOD

Original SMLE No. 4 MK I Magazine Very Good condition Condition is generally as shown in pictures   

No. 4 MK I Magazine - CONVERTED

Original British production SMLE No. 4 MK I Magazine.  These were converted from No1 magazines by the Brits and reissued for use with the No4 Rifles Good condition with minor surface wear.

1 - BAND, lower (USED)

1 Plate J:  Original Item,  BB 8554. 

1 - BAND, lower (New Old Stock)

1 Plate J:  Original Item, like new condition BB 8554. 

4 BOLT, stock (used)

Original Item: BB 8557 Stock Bolt Only USED/GOOD Condition - some surface wear

4 BOLT, stock (new old stock in wrap)

Original Item: BB 8557 New old stock with original wrap

6 WASHER, spring No1 & No4 Rifles (NOS)

Original Item:  NEW OLD STOCK WASHER, spring BB 8641

7 - (Fair Condition) BRACKET Buttstock Complete (For No. 1 and No. 4)

Original Item: Offset pattern Includes Complete Buttstock Bracket Assembly with Swivel Mounting Screws NOT included    Condition: Generally as shown with worn surface finish.   For Butt swivel to be demanded under Rifles No.1 (Cat.No...

7 - BRACKET only

Original Issue: Includes Buttstock Bracket Only No1 pattern for the 1/4 x 30 tpi (whitworth form) not the No4 1/4x26 BSF    BB 0664 For Butt swivel to be demanded under Rifles No.1 (Cat.No. BB 0664) used with Swivel, sling, Mk.I...

7 - BRACKET Assembly (No4-Stamped)

Includes Complete Buttstock Bracket Assembly with Swivel and Mounting Screws   The wood screws included are the smaller No1 type.     For No4 Rife.  Centered sling swivel setup, sheet metal type without swivel mount screw

11: COLLAR

For trigger guard screw

13 - CAP, handguard

13 Plate J.  Cap for front/upper hand guard, original item in very good - excellent cond.

British - No4 Mk1, Trigger Guard 2nd variation (sheet metal), Good Condition

Original Item: Sheet metal type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish   British Markings

British - No4 Mk1, Trigger Guard 2nd variation (sheet metal), VERY Good Condition

Original Item: Sheet metal type Unnumbered  Used - VERY GOOD - Very minor surface blemishes and dark finish British Markings

Canadian - No4 Mk1, Trigger Guard 2nd variation (sheet metal), Good Condition

Original Item: Sheet metal type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish Canadian Markings

Canadian - No4 Mk1, Trigger Guard 2nd variation (sheet metal), VERY Good Condition

Original Item: Sheet metal type Unnumbered  Used - VERY GOOD - Very minor surface blemishes and dark finish Canadian Markings

17 - No4 Mk1, Trigger Guard 1st variation (milled, Low Grade)

Original Item:  Milled steel type Mixed Manufacturers: US, Canadian, & British Low grade condition with some major surface blems (as pictured) but useable   BB 8582

Canadian No4 Mk1, Trigger Guard 1st variation Milled - Used - GOOD Condition

Original Item:  Milled steel type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish   Canadian Markings   BB 8582

Canadian No4 Mk1, Trigger Guard 1st variation Milled - Used - VERY GOOD

Original Item:  Milled steel type Unnumbered  Used - VERY GOOD - Very minor surface blemishes and dark finish Canadian Markings   BB 8582

British No4 Mk1, Trigger Guard 1st variation Milled - Used - GOOD Condition

Original Item:  Milled steel type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish British Markings   BB 8582

British No4 Mk1, Trigger Guard 1st variation Milled - Used - VERY GOOD

Original Item:  Milled steel type Unnumbered  Used - VERY GOOD - Very minor surface blemishes and dark finish British Markings   BB 8582

SAVAGE No4 Mk1, Trigger Guard 1st variation SAVAGE (Square S marking) Used - GOOD

Original Item:  Milled steel type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish Savage square "S" marking on frame   BB 8582

SAVAGE No4 Mk1, Trigger Guard 1st variation SAVAGE (Round S marking) Used - GOOD

Original Item:  Milled steel type Unnumbered  Used -  GOOD Condition - Minor surface blemishes (scratches and minor rust spots) and may have lighter finish Savage round "S" marking on frame   BB 8582

SAVAGE No4 Mk1, Trigger Guard 1st variation SAVAGE (Round S marking) Used - VERY GOOD

Original Item:  Milled steel type Unnumbered  Used - VERY GOOD - Very minor surface blemishes and dark finish Savage round "S" marking on frame   BB 8582

British Trigger Guard with Mated Trigger

Original Item:  Trigger and pin already installed British Markings

SAVAGE No4 Mk1, Trigger Guard 1st variation SAVAGE (square S marking) - VERY GOOD

Original Item:  Milled steel type Unnumbered    Used - VERY GOOD - Very minor surface blemishes and dark finish   Savage square "S" marking on frame   BB 8582

18 - SCREW, Trigger Guard, Rear (NOS)

Original Item:  BB 8610 1 screw included Rear Trigger Guard Screw NEW OLD STOCK

19: SCREW, front Trigger Guard

No4- 19 Plate J, original item.  BB 8611 Flat Top Screw for No. 4 Trigger Guard Used but good condition Referred to as "The King Screw" by the British

20: WASHER

No4- 20 Plate J, original item.   BB8640 For Flat Top Screw for No. 4 Trigger Guard  

21-25 Plate, BUTT assembly with trap, Steel, Canadian (new old stock)

Original Item:  Buy 5 and get them in the original Unopened box   21: PLATE 21-n4j     22: TRAP 22-n4j BB 8636   23: PIN 23-n4j BB 8592   24: SPRING 24-n4j BB 0762 25:...

22: No1 & No4 Trap, butt plate (alloy) with pin

Original items: 1 piece of parts 46 and 47  BB 8636 BB 8592

24: SPRING, butt, trap

To be demanded under Rifles No.1 (Cat.No. 0762)

25 - Screw for Safety/Bolt Lock & Trap, Butt Plate

25 Plate J, original item, BB 8614:  Used for both the Bolt Lock / Safety Catch and Butt Plate trap spring assembly.   New Old Stock  Buy 20 and get them in an original-unopened box.

26: SCREW, butt plate (1 piece)

Original item: BB 8613 Worn but useable condition.  Generally as shown. One screw included.

27 - SCREW, swivel (Mk. 1 Bracket) for No4 rifle - Good condition

27 Plate J:  original item.  BB 8037.  For No4 rifle swivels, Front and Rear.   Head and condition of screw generally as shown in picture.

27 - SCREW, swivel (Mk. 1 Bracket) for No4 rifle - FAIR condition

27 Plate J:  original item.  BB 8037.  For No4 rifle swivels, Front and Rear.   Head of screw generally in FAIR condition as pictured

28: Butt Stock, Canadian, Maple? (Long) Excellent

Original Item: BB 8629 Maple / Normal Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)  

British Pattern No.4 Butt Stock with No.1 Brass Butt Plate and Brass Oiler (Fair)

Original Items:  No.4 Butt Stock with the British Receiver Pattern Front and Repair Marks to fit the No.1 Butt Plate (as pictured) Enfield (EFD) Marked Brass Oiler with rusted/pitted/bent stem (Fair Condition) No.1 Brass Butt Plate (Good...

28: Butt Stock, British, Walnut (Normal) Excellent

Original Item: BB 8629 Walnut / Normal Length: British Marked Excellent Condition (minor dings/stains from years of storage)

28: Butt Stock, British, Beech (Normal) Excellent

Original Item: BB 8629 Beech / Normal Length: British Marked Excellent Condition (minor dings/stains from years of storage)

28: Butt Stock, British, Beech (Long) Excellent

Original Item: BB 8629 Beech / Long Length: British Marked Excellent Condition (minor dings/stains from years of storage)  

28: Butt Stock, Canadian, Walnut (Short) Excellent

Original Item: BB 8629 Walnut /Short Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)

Canadian Pattern No.4 Butt Stock with No.1 Brass Butt Plate and Brass Oiler (Fair)

Original Items:  No.4 Butt Stock with the Canadian Receiver Pattern Front and Repair Marks to fit the No.1 Butt Plate(as pictured) Enfield (EFD) Marked Brass Oiler with rusted/pitted/bent stem (Fair Condition) No.1 Brass Butt Plate (Good...

28: Butt Stock, Canadian, Birch (Normal) Excellent

Original Item: BB 8629 Birch / Normal Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)  

28: Butt Stock, Canadian, Walnut (Normal) Excellent

Original Item: BB 8629 Walnut / Normal Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)  

28: Butt Stock, Canadian, Birch (Long) Excellent

Original Item: BB 8629 Birch / Long Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)  

28: Butt Stock, Canadian, Walnut (Long) Excellent

Original Item: BB 8629 Walnut / Long Length: Long Branch Marked Excellent Condition (minor dings/stains from years of storage)